BWDMM - PYROCATECHOL, CX0560

  • MSDS: BWDMM
  • Manufacturer: EM SCIENCE
  • Product Name: PYROCATECHOL, CX0560
  • National Stock Number: 6810-00N056041
Product Identification

Product ID:PYROCATECHOL, CX0560
MSDS Date:01/22/1993
FSC:6810
NIIN:00N056041
MSDS Number: BWDMM

Responsible Party
EM SCIENCE
480 DEMOCRAT RD
GIBBSTOWN, NJ 08027
US

Emergency Phone: 800-424-9300(CHEMTREC)

Info Phone: 609-345-9200

Cage: DO242

Contractor
EM SCIENCE
70 GIBBSTOWN, NJ 08927 US

Telephone: 800-424-9300 (CHEMTREC)

Cage: DO242

Ingredients

PYROCATECHOL; (CATECHOL) (SARA III)

CAS: 120-80-9

RTECS: UX1050000

Fraction By Weight: 100%

OSHA PEL 5 PPM, S

ACGIH TLV: 5 PPM, S

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INHALED, SWALLOWED OR
ABSORBED THROUGH SKIN. IRRITATING ON CONTACT W/SKIN, EYES OR MUCOUS
MEMBRANES. MAY CAUSE CONVULSIONS & DAMAGE TO BLOOD, CENTRAL NERVOUS
SYSTEM & RESPIRATORY SYSTEM. TE STS ON LAB ANIMALS INDICATE
MATERIAL MAY PRODUCE ADVERSE MUTAGENIC & REPRODUCTIVE EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:DATA NOT AVAILABLE.

First Aid

First Aid:GET MED ASSISTANCE FOR ALL CASES OF OVEREXP. SKIN:IMMEDIATELY
FLUSH THORO W/LARGE AMOUNTS OF WATER. REMOVE CONTAMINATED CLOTHING
& WASH BEFORE REUSE. EYES:IMMEDIATELY FLUSH THORO W/WATER FOR AT
LEAST 15 MINUTES. INHAL:REMOVE TO FRESH AIR; GIVE ARTF RESP IF
BREATHING HAS STOPPED. INGEST:DO NOT INDUCE VOMITING; GET IMMEDIATE
MEDICAL ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:261F,127C
Extinguishing Media:CO*2, FOAM, DRY CHEMICAL, WATER.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMPOSITION PRODUCES TOXIC
FUMES.

Accidental Release

Spill Release Procedures:EVACUATE AREA OF ALL UNNEC PERS. WEAR SUITABLE
PROT EQUIP LISTED UNDER EXPOS/PERSONAL PROT. ELIM ANY IGNIT SOURCES
UNTIL AREA IS DETERMINED TO BE FREE FROM EXPOS/FIRE HAZS. CONTAIN
RELS & ELIM ITS SOU RCE, IF THIS CAN BE DONE W/OUT RISK. TAKE
(SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:KEEP CONTAINER TIGHTLY CLOSED. STORE
IN A COOL, DRY AREA AWAY FROM IGNITION SOURCES. DO NOT BREATHE
DUST. DO NOT GET IN EYES, ON SKIN OR ON CLOTHING.
Other Precautions:DO NOT TAKE INTERNALLY.

Exposure Controls

Respiratory Protection:IF WORKPLACE EXPOS LIM(S) OF PROD/ANY COMPONENT
IS EXCEEDED, NIOSH/MSHA APPRVD AIR SUPPLIED RESP IS ADVISED IN
ABSENCE OF PROPER ENVIRON CONTROL. OSHA REGS ALSO PERMIT OTHER
NIOSH/MSHA RESPS (NEG PRES S TYPE) UNDER SPECIFIED CNDTNS (SUPDAT)
Ventilation:MATERIAL MUST BE HANDLED OR TRANSFERRED IN AN APPROVED FUME
HOOD OR W/EQUIVALENT VENTILATION.
Protective Gloves:BUTYL OR EQUIVALENT GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:PROT CLTHG (IMPERVIOUS) SHOULD BE WORN WHEN
HNDLG THIS MATL. EYE WASH & SAFETY EQUIP SHOULD BE READILY
AVAILABLE.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
SPILL PROC:UP & CONTAINERIZE FOR PROPER DISP AS DESCRIBED UNDER DISP.
COMPLY W/FED, STATE & LOC REGS ON REPORTING RELS. REPORTABLE
QUANTITY:1 LB. RESP PROT:(SEE YOUR SAFETY EQUIPMENT SUPPLIER).
ENGINE ERING &/OR ADMINISTRATIVE CONTROLS SHOULD BE IMPLEMENTED TO
REDUCE EXPOSURE.

Chemical Properties

Boiling Pt:B.P. Text:475F,246C
Melt/Freeze Pt:M.P/F.P Text:221F,105C
Vapor Density:3.79
Spec Gravity:1.344 (H*2O=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE CRYSTALS.

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZERS.
Stability Condition to Avoid:EXTREME HEAT; CONTACT W/IGNITION SOURCE.
Hazardous Decomposition Products:CO*X.

Disposal

Waste Disposal Methods:MATL DOES NOT HAVE EPA WASTE NUMBER & IS NOT A
LISTED WASTE, HOWEVER CONSULTATION W/PERMITTED WASTE DISPOSAL SITE
(TSD) SHOULD BE ACCOMPLISHED. ALWAYS CONTACT A PERMITTED WASTE
DISPOSER (TSD) TO ASSUR E COMPLIANCE W/ALL CURRENT LOC, STATE &FED
REGS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.